FLOWER POT PLAY SET

Flower Pot Play Set | Creative Crochet Workshop @creativecrochetworkshop

FLOWER POT PLAY SET

LoveCrochet

 Flower Pot Play Set

This flower pot play set is a six piece garden play set for any aspiring gardener!

Flower Pot Play Set | Creative Crochet Workshop @creativecrochetworkshop

Find Flower Pot Play Set On Ravelry!
Please share and favorite!

SKILL LEVEL: Easy to Intermediate 
Basic stitches, simple shaping and finishing.

MATERIALS:
Yarns: Double knitting/light worsted yarn  (3) (can also be made with worsted yarn)
Approx. 25-50 g of double knitting/light worsted yarn, in colors of choice
Hooks & Notions:
Size 3.50 mm Hook
Yarn Needle
Stitch Marker
Toy Stuffing/Fiberfill

GAUGE: 22 sts x 30 rows = 10 x 10 cm
Tension/Gauge is not necessary for this project to be perfect

BUY THE PDF VERSION FOR ONLY $3.00!

Flower Pot Play Set | Creative Crochet Workshop @creativecrochetworkshop

INSTRUCTIONS:

Flowerpot with Ground:

Size:  7cm in length

Ground:

This part is made by working in continuous rounds, so you may want to use a stitch marker to keep record of your current rnd.

Rnd 1: With ground color, CH 2. Work 6 SC in second CH from hook. Place a stitch marker in the last SC to designate the end of the rnd.

Rnd 2: Work 2 SC in each ST around (12 SC). MM

Rnd 3: *Work 2 SC in first ST and 1 SC in next ST. Repeat from * around (18 SC). MM

Rnd 4 – 20: SC in each ST around (18 SC). MM

Rnd 21: For this rnd only work in the back loops. *Work 2 SC in first ST and 1 SC in next two STS. Repeat from * around (24 SC). MM

Rnd 22: *Work 2 SC in first ST and 1 SC in next three STS. Repeat from * around (30 SC).

Rnd 23: *Work 2 SC in first ST and 1 SC in next four STS. Repeat from * around (36 SC).

Rnd 24: *Work 2 SC in first ST and 1 SC in next five STS. Repeat from * around (42 SC).

Rnd 25: *Work 2 SC in first ST and 1 SC in next six STS. Repeat from * around (48 SC).

Rnd 26: *Work 2 SC in first ST and 1 SC in next seven STS. Repeat from * around (54 SC). FO and leave a long tail for sewing.

Turn middle part inside out (the wrong side is now on the outside, and the right side on the inside)

The ground is worked with the right side facing outward; this needs to be flipped inside out, so that the top ground is facing right side up when attached to pot.

Flower Pot:

This part is made by working in continuous rounds, so you may want to use a stitch marker to keep record of your current rnd.

Rnd 1: With pot color, CH 2. Work 6 SC in second CH from hook. Place a stitch marker in the last SC to designate the end of the rnd.

Rnd 2: Work 2 SC in each ST around (12 SC). MM

Rnd 3: *Work 2 SC in first ST and 1 SC in next ST. Repeat from * around (18 SC). MM

Rnd 4: *Work 2 SC in first ST and 1 SC in next two STS. Repeat from * around (24 SC). MM

Rnd 5: *Work 2 SC in first ST and 1 SC in next three STS. Repeat from * around (30 SC).

Row 6: *Work 2 SC in first ST and 1 SC in next four STS. Repeat from * around (36 SC).

Rnd 7: For this rnd only work in the back loops. SC in each ST around (36 SC). MM

Rnd 8-10: SC in each ST around (36 SC). MM

Rnd 11: *Work 2 SC in first ST and 1 SC in next five STS. Repeat from * around (42 SC).

Rnd 12-15: SC in each ST around (42 SC). MM

Rnd 16: *Work 2 SC in first ST and 1 SC in next six STS. Repeat from * around (48 SC). MM

Rnd 17-20: SC in each ST around (48 SC). MM

Rnd 21: *Work 2 SC in first ST and 1 SC in next seven STS. Repeat from * around (54 SC). MM

Rnd 22-25: SC in each ST around (54 SC). MM

Rnd 26: For this rnd only work in the front loops.

SC in each ST around (54 SC).  CH 1, turn

Rnd 27: SC in each ST around (54 SC). SL ST into first SC , CH 1 DO NOT TURN, continue in the round

Rnd 28 – 30: SC in each ST around (54 SC).  SL ST into first SC, CH 1 DO NOT TURN, continue in the round. FO

From rnd 26 this creates a flap that hangs over the pot, creating the effect of the top part of a flower pot.
Attach with invisible stitches to sides of pot.

How to assemble:

 Stuff ground center with tissue/stuffing to form its shape, this is only temporary

Place stuffing inside pot, create a hole in the middle; this is where the ground center will be placed.

Insert ground.

 Attach ground to pot by sewing into the back loops created by rnd 26. Match up stitches for a perfect fit. Use ground tail for sewing.

 As you sew add stuffing to form pot, and to surround the center of the ground.

Remove tissue/stuffing from ground.

Flower Pot Play Set | Creative Crochet Workshop @creativecrochetworkshop

Flower and Stem:

Size:  15cm in length

This part is made by working in continuous rounds, so you may want to use a stitch marker to keep record of your current rnd.

Starting with the stem:

Rnd 1: With stem color, CH 2. Work 6 SC in second CH from hook. Place a stitch marker in the last SC to designate the end of the rnd.

Rnd 2: Work 2 SC in each ST around (12 SC). MM.

The first few rows will curl inwards, just flip them outwards, so that you are working on the outside.

Rnd 3-20: SC in each ST around (12 SC). MM

Start to stuff firmly with fiberfill, and continue stuffing as you work

Rnd 21-30: SC in each ST around (12 SC). MM

Rnd 31: Work as follows – 1 SC in next 6 SC, 1 HDC in next two STS, 1 DC in next two STS, and 1 HDC in next two STS. (12 STS). MM

Rnd 32-33: Repeat row 31. (12 STS)MM

Rnd 34: Change color. SC in each ST around (12 SC). MM

Rnd 35-36: For these two rnds only work in the back loops. SC in each ST around (12 SC). MM

Mark last loop and finish stuffing stem

Rnd 37: *DECR across first two STS. Repeat from * around (6 SC). FO and sew opening close.

With flower color, insert hook into marked last loop and continue as follows:

Pink Flower Pattern:

Work :*( 1 SC, 1 HDC, 1 DC, 1 TR, 1 DC, 1 HDC, 1 SC) all in one loop, SKIP next loop. Repeat from * five times more ( six petals)

Work :*( 1 SC, 1 HDC, 1 DC, 2 TR, 1 DC, 1 HDC, 1 SC) all in one loop, SKIP next loop. Repeat from * five times more (twelve petals). FO and weave in ends

Yellow Flower Pattern:

Work : *(1 SC, 1 HDC, 1 DC, 1 TR, 2 CH, SL ST to top of TR (picot made), 1 DC, 1 HDC, 1 SC) all in one loop, SKIP next loop. Repeat from * eleven times more (twelve petals). FO and weave in ends.

Weave tail into the back stitches of the leaf.

Leaf:  CH 9, 1 SC in second CH from hook, 1 SC in next, 1 HDC in next two STS, 1 DC in next two STS, 1 TR in next ST, (1 TR, 2 HDC, 1 TR in last ST).

Continue working up the other side, 1 TR in next ST, 1 DC in next two STS, 1 HDC in next two STS, 1 SC in next two STS, SL ST into first SC made. FO

Weave tail into the back stitches of the leaf.

Pull gently on tail to curl front of leaf slightly. Weave again thru back and trim.

Sew leaves onto stem at various positions.

Flower and Flowerpot together:

Size:  17cm  in length worked with a 3.50mm hook and double knitting/light worsted yarn

Flower Pot Play Set | Creative Crochet Workshop @creativecrochetworkshop

Watering Can:

Size:  14cm in height and 17cm in width

Can Body: 

This part is made by working in continuous rounds, so you may want to use a stitch marker to keep record of your current rnd.

Rnd 1: With can color, CH 2. Work 6 SC in second CH from hook. Place a stitch marker in the last SC to designate the end of the rnd.

Rnd 2: Work 2 SC in each ST around (12 SC). MM

Rnd 3: *Work 2 SC in first ST and 1 SC in next ST. Repeat from * around (18 SC). MM

Rnd 4: *Work 2 SC in first ST and 1 SC in next two STS. Repeat from * around (24 SC). MM

Rnd 5: *Work 2 SC in first ST and 1 SC in next three STS. Repeat from * around (30 SC).

Rnd 6: *Work 2 SC in first ST and 1 SC in next four STS. Repeat from * around (36 SC).

Rnd 7: *Work 2 SC in first ST and 1 SC in next five STS. Repeat from * around (42 SC).

Rnd 8: *Work 2 SC in first ST and 1 SC in next six STS. Repeat from * around (48 SC). MM

Rnd 9: *Work 2 SC in first ST and 1 SC in next seven STS. Repeat from * around (54 SC). MM

Rnd 10: For this rnd only work in the back loops. SC in each ST around (54 SC). MM

Rnd 11-19: SC in each ST around (54 SC). MM

Rnd 20: For this rnd only work in the front loops. SC in each ST around (54 SC). MM

DO NOT FASTEN OFF, main can color un-worked and continue as follows.

Attach water color at the first inside loop
and work as follows:

Rnd 1: *DECR across first two STS and SC in next seven STS. Repeat from * around (48 SC). MM

Rnd 2: *DECR across first two STS and SC in next six STS. Repeat from * around (42 SC). MM

Rnd 3: *DECR across first two STS and SC in next five STS. Repeat from * around (36 SC). MM

Rnd 4: *DECR across first two STS and SC in next four STS. Repeat from * around (30 SC). MM

Rnd 5: *DECR across first two STS and SC in next three STS. Repeat from * around (24 SC). MM

Rnd 6: *DECR across first two STS and SC in next two STS. Repeat from * around (18 SC). MM

Push fiberfill through opening and stuff not too firmly just to give shape.

Rnd 7: *DECR across first two STS and SC in next ST. Repeat from * around (12 SC).

FO and sew opening close.

Reinsert hook into last ST left on Rnd 20 with the main can color.

Rnd 21: SC in each ST around (54 SC). MM

Rnd 22: *DECR across first two STS and SC in next seven STS. Repeat from * around (48 SC). MM

Rnd 23: *DECR across first two STS and SC in next six STS. Repeat from * around (42 SC). MM

Rnd 24: *DECR across first two STS and SC in next five STS. Repeat from * around (36 SC). MM

Rnd 25-28: SC in each ST around (36 SC). MM

Rnd 29: SL ST in each ST around (36 SC). FO and weave in end.

Spout:

Rnd 1: With can color, CH 2. Work 6 SC in second CH from hook. Place a stitch marker in the last SC to designate the end of the rnd.

Rnd 2: Work 2 SC in each ST around (12 SC). MM

Rnd 3: *Work 2 SC in first ST and 1 SC in next ST. Repeat from * around (18 SC). MM

Rnd 4: *Work 2 SC in first ST and 1 SC in next two STS. Repeat from * around (24 SC). MM

Rnd 5: For this rnd only work in the back loops. SC in each ST around (24 SC). MM

Rnd 6: SC in each ST around (24 SC). MM

Rnd 7: *DECR across first two STS and SC in next two STS. Repeat from * around (18 SC). MM

Rnd 8: SC in each ST around (18 SC). MM

Handle:

How to do the Pebble Stitch: DC5tog: (optional)

Step 1: Yarn over, insert hook into next ST in row, Yarn over,  draw yarn through (3 loops)

Step 2: Yarn over, insert hook into same ST, Yarn over,  draw through 2 loops (4 loops)

Step 3: Yarn over, insert hook into same ST, Yarn over,  draw through 2 loops (5 loops)

Step 4: Yarn over,  insert hook into same ST, Yarn over,  draw through 2 loops (6 loops)

Step 5: Yarn over,  draw yarn through all 6 loops on hook, tighten down

With handle color, CH 33

Row 1: 1 SC in second CH from hook, 1 SC into each ST to end, turn

Row 2: (optional – 1 CH, SKIP first SC, 1 SC into next SC, *DC5tog into next SC, 1 SC into each of next three SC, repeat from * ending with 1 SC into last SC, turn)
1 SC in second CH from hook, 1 SC into each ST to end, turn

Row 3: 1 CH, SKIP first SC, and 1 SC into each SC to end. FO and sew handle over the can opening.

Spout Flower:

With flower color, CH 4 and SL ST into first CH to form a ring.

Rnd 1: CH 3 ( this counts as the first DC), work 15 DC into the ring, join with a SL ST into top of 3 CH

Rnd 2: For this rnd only work in the back loops.

CH 1, work 1 SC in first ST, 6 DC in next ST (first petal formed), *SKIP next ST,  work 1 SC in next ST, 6 DC in next ST, repeat from * three more times (5 petals created)

Rnd 3: Join with a SC into first front loop (rnd 3 is worked in front of rnd 2), work 1 HDC and 1 SC in same loop, *SKIP next loop, work 1 SC, 1 HDC, 1SC in next loop. Repeat from * around, SL ST in first SC made.

Weave the yarn into the back of all five petals made; gently pull yarn to gather petals just a little bit. FO

Sew Flower to front of spout.

Garden Spade:

Size:  19cm in length

This part is made by working in continuous rounds, so you may want to use a stitch marker to keep record of your current rnd.

Rnd 1: With handle color, CH 2. Work 6 SC in second CH from hook. Place a stitch marker in the last SC to designate the end of the rnd.

Rnd 2: Work 2 SC in each ST around (12 SC). MM

Rnd 3: *Work 2 SC in first ST and 1 SC in next ST. Repeat from * around (18 SC). MM

Rnd 4-6: SC in each ST around (18 SC). MM

Rnd 7: *DECR across first two STS and SC in next ST. Repeat from * around (12 SC). MM

Change to spade color

Rnd 8-20: SC in each ST around (12 SC). MM

Push fiberfill through opening and stuff
firmly to give shape.

Rnd 21: For this rnd only work in the back loops. SC in each ST around (12 SC). MM

Rnd 22-24: SC in each ST around (12 SC). MM

Rnd 25:  Work 2 SC in next 2 STS, work 1 SC in next 4 STS, work 2 SC in next 2 STS, work 1 SC in next 4 STS (16 SC). MM

Rnd 26: Work 2 SC in next 4 STS, work 1 SC in next 4 STS, work 2 SC in next 4 STS, work 1 SC in next 4 STS (24 SC). MM

Rnd 27: Work 1 SC in next 2 STS, work 2 SC in next 4 STS, work 1 SC in 8 STS, work 2 SC in next 4 STS, work 1 SC in next 6 STS (32 SC). MM

Rnd 28-30: SC in each ST around (32 SC). MM

Rnd 31:  Work 1 SC in next 5 STS, DECR over next 2 STS, work 1 SC in next 14 STS, DECR over next 2 STS, work 1 SC in next 9 STS (30 SC). MM

Rnd 32-35: SC in each ST around (30 SC). MM

Rnd 36:  Work 1 SC in next 5 STS, DECR over next 2 STS, work 1 SC in next 13 STS, DECR over next 2 STS, work 1 SC in next 8 STS (28 SC). MM

Rnd 37:  Work 1 SC in next 5 STS, DECR over next 2 STS, work 1 SC in next 12 STS, DECR over next 2 STS, work 1 SC in next 7 STS (26 SC). MM

Rnd 38:  Work 1 SC in next 5 STS, DECR over next 2 STS, work 1 SC in next 11 STS, DECR over next 2 STS, work 1 SC in next 6 STS (24 SC). MM

Rnd 39:  Work 1 SC in next 5 STS, DECR over next 2 STS, work 1 SC in next 10 STS, DECR over next 2 STS, work 1 SC in next 5 STS (22 SC). MM

Rnd 40:  Work 1 SC in next 5 STS, DECR over next 2 STS, work 1 SC in next 9 STS, DECR over next 2 STS, work 1 SC in next 4 STS (20 SC). MM

Rnd 41:  Work 1 SC in next 5 STS, DECR over next 2 STS, work 1 SC in next 8 STS, DECR over next 2 STS, work 1 SC in next 3 STS (18 SC). MM

Rnd 42:  Work 1 SC in next 5 STS, DECR over next 2 STS, work 1 SC in next 7 STS, DECR over next 2 STS, work 1 SC in next 2 STS (16 SC). MM Finishing stuffing handle.

Stuff until where spade (yellow) starts to widen.

Rnd 43:  Work 1 SC in next 5 STS, DECR over next 2 STS, work 1 SC in next 6 STS, DECR over next 2 STS, and work 1 SC in next ST (14 SC). MM

Rnd 44:  Work 1 SC in next 5 STS, DECR over next 2 STS, work 1 SC in next 5 STS, DECR over next 2 STS (12 SC). MM

Rnd 45:  Work 1 SC in next 4 STS, DECR over next 2 STS, work 1 SC in next 4 STS, DECR over next 2 STS (10 SC). MM

Rnd 46:  Work 1 SC in next 3 STS, DECR over next 2 STS, work 1 SC in next 3 STS, DECR over next 2 STS (8 SC). FO

Sew opening close, work a few invisible stitches into spade to help keep shape, weave in ends.

Flower Pot Play Set | Creative Crochet Workshop @creativecrochetworkshop

 

BUY THE PDF VERSION FOR ONLY $3-00
Includes photos to help you hook this pattern!

A 11 page user Friendly Pdf with clear instructions and
photos to help you hook this pattern.

I use US Crochet stitch terminology
Pdf Includes:
Helpful Notes and Tips
conversion Chart
Crochet Abbreviations & Terms
Stitch Guide

 

Print Friendly, PDF & Email
This site contains affiliate links. I may receive a small commission (at not extra cost to you) if you make a purchase after clicking on an affiliate link. Thank you so much for your support! Shop Now

Leave a Reply

Your email address will not be published. Required fields are marked *