Granny Groovy Patch Blanket – Part Three

September 2015 Mystery Blanket CAL
A crochet along mystery blanket in five parts 🙂
PART ONE: September 09 – PLEASE CHECK HERE FOR ALL THE REQUIREMENTS!
PART TWO: September 16
PART THREE: September 23
PART FOUR: September 30
I use US Crochet stitch terminology

PART THREE:
Large Circle Granny Square: Make 2
SIZE: 25 CM X 25 CM

With 4,00 mm Hook and yarn
Make a magic ring, 

LoveCrochet
Rnd 1: CH3 (counts as 1DC), work 11DC into ring (12 DC), SL ST into top of 3rd CH
– change color
Rnd 2 CH3 (counts as 1DC), work 1 DC into same ST. Work 2 DC into each ST until end (24 DC), SL ST into to of 3rd CH
– change color
Rnd 3: CH3 (counts as 1DC). work 1 DC into same ST, work 1 DC into next ST. *Work 2 DC into next ST, work 1 DC into next ST (36 DC). Repeat from * until end, SL ST into top of 3rd CH
– change color
Rnd 4: CH3 (counts as 1DC). work 1 DC into same ST, work 1 DC into next 2 STS. *Work 2 DC into next ST, work 1 DC into next 2 STS (48 DC). Repeat from * until end, SL ST into top of 3rd CH
– change color
Rnd 5: CH3 (counts as 1DC). work 1 DC into same ST, work 1 DC into next 3 STS. *Work 2 DC into next ST, work 1 DC into next 3 STS (60 DC). Repeat from * until end, SL ST into top of 3rd CH
– change color
Rnd 6: CH3 (counts as 1DC). work 1 DC into same ST, work 1 DC into next 4 STS. *Work 2 DC into next ST, work 1 DC into next 4 STS (72 DC). Repeat from * until end, SL ST into top of 3rd CH
– change color
Rnd 7: CH3 (counts as 1DC). work 1 DC into same ST, work 1 DC into next 5 STS. *Work 2 DC into next ST, work 1 DC into next 5 STS (84 DC). Repeat from * until end, SL ST into top of 3rd CH
– change color
Rnd 8: CH3 (counts as 1DC). work 1 DC into same ST, work 1 DC into next 6 STS. *Work 2 DC into next ST, work 1 DC into next 6 STS (96 DC). Repeat from * until end, SL ST into top of 3rd CH
– change color
Rnd 9: CH3 (counts as 1DC), work 2 DC into same ST, CH2, work 3 DC into same ST (corner made), CH1, SKIP 3 STS, work 3 DC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 SC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 DC  into next ST, SKIP 3 STS, CH1.
*Work 3 DC, 2CH, 3 DC into next ST, (corner made), CH1, SKIP 3 STS, work 3 DC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 SC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 DC  into next ST, SKIP 3 STS, CH1.
Repeat from * 2 more times. SL ST into top of 3rd CH
Rnd 10: SL ST into next 3 STS, SL ST into corner.
CH3 (counts as 1DC), work 2 DC into same ST, CH2, work 3 DC into same ST (corner made), CH1, SKIP 3 STS, work 3 DC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 DC  into next ST, SKIP 3 STS, CH1.
*Work 3 DC, 2CH, 3 DC into next ST, (corner made), CH1, SKIP 3 STS, work 3 DC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 DC  into next ST, SKIP 3 STS, CH1.
Repeat from * 2 more times. SL ST into top of 3rd CH
Rnd 11: CH3 (counts as 1DC), work 1 DC into each ST all around – working 2 DC, 2CH, 2 DC into each corner.
– change color
Rnd 12: repeat round 11. Fasten off and weave in ends.

Note: pattern adjustments for a more complete circle in the square (my original pattern was intended to pull the circle up at the corner) however if a complete round circle is preferred: 

Rnd 9: CH4 (counts as 1TR), work 2 TR into same ST, CH2, work 3 TR into same ST (corner made), CH1, SKIP 3 STS, work 3 DC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 SC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 DC  into next ST, SKIP 3 STS, CH1.
*Work 3 TR, 2CH, 3 TR into next ST, (corner made), CH1, SKIP 3 STS, work 3 DC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 SC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 DC  into next ST, SKIP 3 STS, CH1.
Repeat from * 2 more times. SL ST into top of 3rd CH
Rnd 10: SL ST into next 3 STS, SL ST into corner.
CH4 (counts as 1TR), work 2 TR into same ST, CH2, work 3 DC into same ST (corner made), CH1, SKIP 3 STS, work 3 DC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 DC  into next ST, SKIP 3 STS, CH1.
*Work 3 DC, 2CH, 3 DC into next ST, (corner made), CH1, SKIP 3 STS, work 3 DC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1, work 3 SC into next ST, SKIP 3 STS, CH1, work 3 SC into next ST, SKIP 3 STS, CH1, work 3 HDC into next ST, SKIP 3 STS, CH1,work 3 DC  into next ST, SKIP 3 STS, CH1.
Repeat from * 2 more times. SL ST into top of 3rd CH

This is the layout for the squares 🙂
Join the squares with any joining method
which you would like to use.
If you want to SC the squares together – use a smaller hook

I whip-stitched my squares together to give some
variation from the squares that I joined with SC.
Size after all squares have been joined
approx 56 cm x 98 cm

var pfHeaderImgUrl = ”;var pfHeaderTagline = ”;var pfdisableClickToDel = 0;var pfHideImages = 0;var pfImageDisplayStyle = ‘right’;var pfDisablePDF = 0;var pfDisableEmail = 0;var pfDisablePrint = 0;var pfCustomCSS = ”;var pfBtVersion=’1′;(function(){var js, pf;pf = document.createElement(‘script’);pf.type = ‘text/javascript’;if(‘https:’ == document.location.protocol){js=’https://pf-cdn.printfriendly.com/ssl/main.js’}else{js=’http://cdn.printfriendly.com/printfriendly.js’}pf.src=js;document.getElementsByTagName(‘head’)[0].appendChild(pf)})();Print Friendly and PDF

Print Friendly
This site contains affiliate links. I may receive a small commission (at not extra cost to you) if you make a purchase after clicking on an affiliate link. Thank you so much for your support!
Creative Crochet Workshop
Save on Crochet and Knitting Supplies at CreateForLess!

8 Comments

  1. Author

    I am so sorry I feel so bad :(. I really do apologize for my typo.

  2. oh how annoying! I've got three because I printed the original file and took it away with me! hey ho, a bit of undoing is in my future!

  3. Author

    I apologize! Yes indeed it should be only 2! I think my fingers will trigger happy because it was part 3 🙂
    I have fixed the typo!! Thank you for letting me know =D

  4. Author

    I am so happy you are excited 🙂 I hope you will like the final result!

  5. Are you sure that we need 3 of this square? There are only two in the layout picture.

  6. I'm so excited! The blanket is really taking shape!!!

  7. Lovely square with this circle in the middle. Thanks for sharing.

    Have a great day, Margaret

Leave a Reply

Your email address will not be published. Required fields are marked *